BPXBH - 2 CUTTING FLUID
- MSDS: BPXBH
- Manufacturer: TAPMATIC CORP
- Product Name: 2 CUTTING FLUID
- National Stock Number: 9150-01-295-7012
Product Identification
Product ID:2 CUTTING FLUID
MSDS Date:07/03/1991
FSC:9150
NIIN:01-295-7012
MSDS Number: BPXBH
Responsible Party
IRVINE, CA 92714-5617
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 714-261-9302
Cage: 54741
Contractor
Cage: 54741
Ingredients
KEROSENE (PETROLEUM), HYDROTREATED; (HYDROTREATED PETROLEUM
CAS: 64742-47-8
Fraction By Weight: 70%
METHYL EICOSENOATE
CAS: 76899-35-9
Fraction By Weight: 16%
ANIMAL FATTY OIL; (GLYCIDERIDIC OIL)
CAS: 8016-28-2
Fraction By Weight: 14%
SALICYLIC ACID, METHYL ESTER; (METHYL ESTER)
CAS: 119-36-8
RTECS: VO4725000
Fraction By Weight: <1%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:CENTRAL NERVOUS SYSTEM
DEPRESSION. SKIN:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE SKIN
DEFATTING. INGEST:IRRITATION OF THE GASTROINTESTINAL TRACT.
EYES:LIQUID OR MIST WILL IRRITATE EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHAL:HEADACHE, DIZZINESS & NAUSEA.
SKIN:IRRITATION & RASH. INGEST:NAUSEA & POSSIBLE VOMITING.
EYE:IRRITATION & INFLAMMATION.
Medical Cond Aggravated by Exposure:NONE REPORTED.
First Aid
First Aid:INHAL:GET PERSON OUT OF CONTAM AREA TO FRESH AIR. IF BRTHG
HAS STOPPED, ARTF RESP SHOULD BE STARTED. SEEK MD ATTN IMMED.
SKIN:WASH WITH SOAP AND WATER. IF RASH DEVELOPS, SEEK MD ATTN.
INGEST:DO NOT IN DUCE VOM. SEEK MD ATTN IMMED. EYES:IMMED FLUSH
WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES, HOLDING EYE-LIDS
APART TO ENSURE FLUSHING OF ENTIRE EYE SURF. SEEK MD ATTENTION
IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:160F,71C
Lower Limits:0.7%
Upper Limits:5%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AS WITH SOLVENT FIRE.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:ALWAYS WEAR EYE PROT. EXTING ALL IGNIT
SOURCES. FOR SMALL SPILLS/DRIPS, MOP/WIPE UP & DISP OF IN DOT
APPRVD WASTE CNTNRS. FOR LG SPILLS, CONTAIN BY DIKING W/SOIL/OTHER
NON-COMBUST SORBENT MATL & THEN PLACE RESIDUE IN DOT APPRVD WASTE
(SUPPDATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, & FLAMES.
STORE IN COOL, DRY, WELL VENT PLACE AWAY FROM INCOMPATIBLE MATLS.
KEEP CNTNR TIGHTLY CLSD WHEN NOT IN USE.
Other Precautions:DO NOT GET IN EYES, ON SKIN, OR ON CLOTHING. USE
ACCORDING TO DIRECTIONS. ALWAYS OBEY HAZARD WARNINGS.
Exposure Controls
Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL (GENERAL).
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL CONDITIONS OF
USE.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE. WASH THOROUGHLY
AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC:CONTAINERS. KEEP OUT OF SEWERS, STORM DRAINS, SURFACE
WATERS, AND SOIL. WASTE DISP METH:SUBJECT TO PROPER WASTE DISPOSAL.
Chemical Properties
Boiling Pt:B.P. Text:>360F,>182C
Vapor Pres:5
Vapor Density:5.7
Spec Gravity:0.87 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW LIQUID. MILD FATTY ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT, FLAME OR SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISP OF CONTAM PROD/MATLS USED IN CLEANING UP
SPILLS/LEAKS IN A MANNER APPRVD FOR THIS MATL. CONSULT APPROP FED,
STATE, AND LOC REGULATORY AGENCIES TO ASCERTAIN PROPER DISP PROCS.
NOTE:EMPTY CONTRS CA N HAVE RESIDUES, GASES & MISTS & ARE (SUPP
DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.